Showing 1–16 of 18 results
The vast majority of all Minis built worldwide would have originally been fitted with a dash tray liner. The dash liners are among the simplest items of trim to fit into a Mini. Cut to a standard patterned shape, they lie in the dash being held in by the back lip of the dash rail,…
The carpets originally fitted to the Australian Mini were not moulded as per the UK spec Minis. The front mat is unique in that it is made from two footwell mats sewn to a tunnel covering piece. The carpet was originally a ribbed type, similar to our narrow weave carpet we use on VW carpets. We…
This length of black leathercloth is sufficient to cover the internal A-posts, dash top rail and dash lower rail on any Mini with a centre speedometer, lacking the moulded plastic fascia introduced on the Clubman. These areas were always originally covered on the original Coopers, otherwise on standard cars they were normally visible as bare painted…
This style of rubber diaphragm was originally used on all models until about 1973 when it was superseded by a wire and cord replacement diaphragm. However, this diaphragm can be used on all standard Mini seats built up until 1993 (before the introduction of the seats with twin post headrests) as many find that these…
This wire squab diaphragm will fit all Minis built between 1960 and 1993 (before the twin post headrest seats were introduced). Originally the early Minis used a one piece moulded rubber diaphragm, however these are no longer available. The wire diaphragm superseded the rubber version item and can be used for a direct swap as…
This design of sunvisor pad was first introduced to MKI Minis in 1966 and was used through til the end of production. These are fitted with plastic brackets that slot into the ends of each pad (supplied separately). We also offer a two tone pad which is white with a black side for when the…
This design of sunvisor pad was first introduced to MKI Minis in 1966 and was used through til the end of production. These are fitted with plastic brackets that slot into the ends of each pad (supplied separately). We also offer a two tone pad which is white with a black side for when the…
This 15 piece kit includes all the panels you will require to trim your MKI Australian Mini. We offer only the standard MKI welded design on these panels. There was another design with simple twin weld lines, but we cannot at present reproduce this as we do not have the necessary tooling. Some original colours may…
We offer only the standard MkI welded design on these panels. There was another design with simple twin weld lines, but we cannot at present reproduce this as we do not have the necessary tooling. Some original colours may no longer be available as these interiors were made as a complete knock down model in…
These front door pocket liners are supplied as a pair and covered in a coloured material to match the rest of the interior trim unlike the UK models which were originally a painted board only. Once positioned correctly inside the door, the liners are held in place with two self tapping screws.  Newton Commercial Part No…
Before 1964 Australian Mini production was based upon UK specifications and followed the standard UK practice. In 1964 unique Australian produced trim began to be fitted as home built content increased. We believe this style was used for all Australian MKI Minis made after June 1969. These seats feature a sewn fluted face with two sets…
These rear quarter panels fit the MKI Australian Saloon models from 1964-1971. Before 1964 Australian Mini production was based upon UK specifications and followed the standard UK practice. In 1964 unique Australian produced trim began to be fitted as home built content increased. The panels are made using our frequency welding machine and we believe are…
Before 1964 Australian Mini production was based upon UK specifications and followed the standard UK practice. In 1964 unique Australian produced trim began to be fitted as home built content increased. We believe this particular design was used after June 1969. The rears have the same flute design as the front seats, with 4 banks of 2…
Before 1964 Australian Mini production was based upon UK specifications and followed the standard UK practice. In 1964 unique Australian produced trim began to be fitted as home built content increased. We believe this particular design was used from 1967 to June 1969. The rears have the same flute design as the front seats, with 6…
Before 1964 Australian Mini production was based upon UK specifications and followed the standard UK practice. In 1964 unique Australian produced trim began to be fitted as home built content increased. We believe this style was used for all Australian Minis made from 1967 to June 1969. These seats feature a sewn fluted face with 6…
This cushion was used on the majority of MKI front seats.It is about 2 thick and has an extra 1 thick piece that can be glued to the front edge to give the seat cover definition and also support for your legs! Please note this is sold individually. When refurbishing your seats we recommend the fitting…
End of content
End of content
No products in the cart.
